Preventing Stakeholders From Ruining Your Sustainability Efforts
7 min
Level
In this article, we’ll review why stakeholders are important, how they could impact your company’s sustainability efforts, and how to prevent them from doing so.
The voice of impact
ESG / CSR
Industries
Ecology
Greenly solutions
GB
GB
Reduce the Carbon Footprint of Your Company's Heating Systems
Level
Navigating the complexities of commercial heating systems and their environmental impact can be a pretty daunting task for any business. Yet, understanding and reducing the carbon footprint of these heating systems is crucial for a sustainable future.
In this article, we break down the essentials: from the different types of heating systems and their ecological impacts to practical strategies for emissions reduction. We'll explore cost-effective measures, technological upgrades, and the importance of employee engagement in this journey toward sustainability. Whether it's a complete system overhaul or small gradual improvements, this article offers a roadmap for businesses ready to make a meaningful difference in their heating efficiency and environmental footprint.
👉 In this article we’ll explore the different ways that companies can reduce the carbon footprint of their heating systems.
Heating systems explained
Heating systems are a major contributor to carbon emissions in commercial settings. Typically powered by fossil fuels like natural gas, oil, or coal, these systems release a significant amount of carbon dioxide (CO2) and other greenhouse gases. For example, studies show that in the US around 32% of all energy use within commercial buildings can be attributed to heating systems.
What types of heating systems are there?
In commercial buildings, a variety of heating systems are used, each with its own set of characteristics and efficiency levels. The most common types include:
- Forced air systems - These systems are commonly used in commercial settings. They work by heating air in a furnace and then distributing it throughout the building via ductwork and vents. These systems can be powered by natural gas, oil, or electricity.
- Radiant heating systems - Radiant systems deliver heat directly from a hot surface to the room. In commercial buildings, they are often found in the form of in-floor heating systems, where pipes under the floor circulate hot water or an electrical heating system.
- Hydronic (boiler) systems - These systems use a boiler to heat water, which is then circulated through a series of pipes to radiators or baseboard heaters. This method is efficient for heating large commercial spaces and can be fueled by natural gas, oil, or electricity.
- Heat pump systems - Gaining popularity for their energy efficiency, heat pumps work by transferring heat from the outside air or ground into the building. They are particularly effective in moderate climates and can be used for both heating and cooling.
- Geothermal systems - Although less common, geothermal heating utilises the earth's stable ground temperature to heat and cool buildings. This system involves pipes buried in the ground that circulate a fluid, which absorbs heat from the ground in the winter and dispels heat in the summer.
The environmental impact of traditional heating systems
The International Energy Agency (IEA) reports that the operations of buildings account for 30% of global energy consumption and contribute 26% of global energy-related emissions - 8% of which are direct emissions, and 18% attributed to indirect emissions resulting from the production of electricity and heat.
💡 These figures are on the rise - in 2022 for example, energy use in the buildings sector increased by 1%.
This is why reducing the carbon footprint of heating systems is essential for achieving global climate goals. For businesses, adopting eco-friendly heating solutions can also lead to a number of benefits including reduced energy consumption and lower operational costs. Let’s take a closer look at these benefits…
Benefits of reducing the carbon footprint of your company’s heating systems
- Cost savings - Implementing energy-efficient practices or upgrading parts of the heating system can lead to significant fuel consumption reductions, resulting in lower utility bills. Adjustments such as improving insulation, regular maintenance, and employing smart thermostats contribute to these savings. Additionally, businesses may be eligible for tax incentives or grants for adopting energy-efficient measures, helping to balance any costs incurred in the process.
- Enhanced reputation - Environmental responsibility is important in today’s business landscape. By taking steps to reduce emissions from heating systems, companies can improve their brand reputation. This eco-friendly approach resonates with a variety of stakeholders including consumers, employees, and investors. Efforts to improve sustainability help to attract new customers and business opportunities while fostering loyalty among existing ones.
- Regulatory compliance - With environmental regulations becoming more stringent, reducing emissions has never been more important. Simple measures like regular system maintenance or more comprehensive upgrades ensure adherence to these regulations, safeguarding against potential legal and financial repercussions.
- Improved workplace environment - Enhancing heating system efficiency can also improve indoor air quality and comfort. These improvements can lead to a healthier, more comfortable workplace, boosting employee satisfaction and productivity, particularly in businesses where indoor time is substantial.
- Long-term sustainability - Adopting measures to reduce heating system emissions aligns with broader sustainability goals. Even minor improvements can extend the lifespan of existing systems and reduce maintenance needs. These actions collectively contribute to the company’s long-term environmental and economic health, demonstrating a commitment to sustainable operations.
Assessing your company's heating systems
Whether you’re updating the entire heating system or implementing measures to reduce the energy consumption of your current setup, the first step is to conduct an assessment of your company’s heating system. This evaluation will help identify areas for improvement and set a benchmark for measuring progress.
Evaluation methods
Begin with a comprehensive energy audit. This involves examining the type, age, and efficiency of your current heating system and identifying where improvements can be made. Look for areas of heat loss, such as poor insulation, and assess the condition of existing equipment.
💡 Consider consulting with energy experts who can provide a detailed analysis of your system’s efficiency and environmental impact. This audit will help you understand your current carbon footprint and set the groundwork for improvements.
Benchmarking
Compare your system's performance with similar businesses or industry benchmarks to understand where your system stands. Familiarise yourself with industry best practices for energy efficiency in heating systems. This may include the adoption of newer technologies, regular maintenance routines, or even simple changes in operational practices. By aligning with these standards, you can ensure that your heating system operates efficiently and effectively.
Data tracking
Regularly monitoring your heating system’s energy consumption is crucial for effective management and improvement. Implement a system of tracking, which could range from regularly reviewing utility bills to investing in advanced energy management systems that provide real-time data and analytics.
This ongoing monitoring will help you spot trends, identify unusual increases in energy usage, and evaluate the effectiveness of any changes or upgrades made. By keeping a close eye on energy consumption, you can make informed decisions that will continue to reduce your heating system's carbon footprint and improve its efficiency.
Actions to reduce heating systems emissions
Reducing heating emissions is best achieved by implementing a variety of different approaches, encompassing both significant system upgrades and smaller, more immediate actions. Let’s take a closer look at the options available to companies looking to improve their heating system emissions:
Install eco-friendly heating systems
- Geothermal heat pumps - These systems use the earth's stable underground temperature to provide heating and cooling. They are highly efficient, producing 5 kW of heat for every 1 kW of electricity consumed. These savings are reflected in utility bills, saving up to 80% when compared to traditional heating systems.
- Solar heating - Solar thermal panels can be installed to capture the sun's energy, converting it into heat for water and space heating. This method can significantly reduce reliance on fossil fuels.
- Biomass boilers - These boilers burn organic materials like wood pellets, chips, or logs. They are considered carbon-neutral as the CO2 emitted is roughly equal to what the plants absorbed during growth.
Upgrading existing systems
- High-efficiency boilers - Modern boilers are more efficient, with some condensing boilers achieving efficiency levels above 90%. This upgrade can substantially reduce fuel consumption and emissions.
- Smart thermostats - These devices allow for precise temperature control and can learn patterns to optimise heating schedules, avoiding energy wastage and reducing costs.
Improving building insulation
- Enhancing insulation - Upgrading insulation in walls, roofs, and floors can significantly reduce heat loss. This action means the heating system doesn’t have to work as hard, thereby saving energy and reducing emissions.
- Double glazing windows - Installing double-glazed windows creates an insulating barrier that retains heat, leading to lower heating demands and energy consumption.
Behavioural changes and maintenance
- Regular maintenance - Ensuring heating systems are regularly serviced and maintained can improve efficiency and lifespan, preventing unnecessary energy loss.
- Employee awareness - Educating employees about energy-saving practices, like responsibly adjusting thermostats and ensuring windows and doors are closed, can make a noticeable difference.
Energy management systems
- Energy monitoring - Advanced systems can provide real-time data on energy usage, helping to identify patterns and areas for improvement. This information can be crucial in making informed decisions about heating management.
- Heat recovery systems - These systems capture waste heat from processes or equipment and reuse it for heating, which can be particularly beneficial in industrial settings.
- Adjusting heating times - Programming heating systems to operate only during peak occupancy hours can lead to significant energy savings.
By implementing a combination of these actions, companies can effectively reduce their heating emissions, contributing to both environmental sustainability and operational cost savings. The choice of actions will depend on specific company needs, building characteristics, and available resources.
👉 Learn more about energy efficiency in our article.
Close
Implementation strategies for sustainable heating systems
Transitioning to a more sustainable heating system in a company involves careful planning, budget considerations, employee involvement, and ongoing monitoring. Here’s a guide to effectively implement these strategies:
Planning
- Initial assessment - Conduct a thorough audit of the current heating system to identify inefficiencies and potential areas for improvement.
- Setting goals - Define clear objectives for what you want to achieve, whether it’s reducing emissions, lowering costs, or both.
- Researching options - Investigate different sustainable heating solutions, considering factors like building size, location, and specific heating needs.
- Develop a timeline - Create a realistic timeline for implementation, considering potential disruptions and the best time for installation.
Budgeting
- Cost analysis - Evaluate the upfront costs of new systems or upgrades and compare them against long-term savings. Consider the lifespan and maintenance costs of new equipment.
- Seek funding - Look for government grants, subsidies, or tax incentives that encourage the adoption of energy-efficient technologies.
- ROI calculation - Calculate the return on investment by considering reduced energy bills, maintenance costs, and potential increases in property value.
- Set a budget - Based on these calculations, set a budget that aligns with your company’s financial capabilities.
Employee involvement
- Communicate - Clearly communicate the reasons for the transition and its benefits to employees. Transparency is key to gaining support.
- Training - Provide training sessions for employees on how to use new systems effectively and adopt energy-saving practices.
- Feedback mechanism - Establish a channel for employees to give feedback or report issues with the new system, ensuring continuous improvement.
Monitoring and adjusting
- Track system performance - After implementation, continuously monitor the system’s performance. Use energy management systems to track energy consumption and efficiency.
- Regular audits - Conduct periodic energy audits to identify any issues or areas for further improvement.
- Adjust strategies - Based on monitoring data and audits, adjust your strategies. This might involve adjusting system settings, addressing unforeseen inefficiencies, or further educating employees.
👉 To learn more about reducing the carbon footprint of your business head over to our blog.
“ Implementing a sustainable heating system is a process that requires ongoing attention and adaptation. By following these strategies, a company can ensure the transition is smooth, cost-effective, and yields the desired environmental and financial benefits. The success of this transition greatly depends on careful planning, budget management, employee engagement, and continuous monitoring and adjustment. ”
What about Greenly?
At Greenly we can help you to assess your company’s carbon footprint, and then give you the tools you need to cut down on emissions. Why not request a free demo with one of our experts - no obligation or commitment required.
If reading this article has inspired you to consider your company’s own carbon footprint, Greenly can help. Learn more about Greenly’s carbon management platform here.
More Articles
View all
What is gold hydrogen?
11 min
Level
In this article, we’ll explore what gold hydrogen is, how it’s extracted, and the role it could play in promoting sustainable energy solutions.
What are the 3 Pillars of Corporate Sustainability?
10 min
Level
What are the 3 pillars of corporate sustainability and why are they important?
What is the PAS 2080 standard?
8 min
Level
What is PAS 2080, and how does it demonstrate a company’s dedication to carbon neutrality?
Share
Subscribe to the newsletter